Modify Selection
- Hazard prevention and control:
- Signalling
- or
- Hand signalling
Home Links
Results 11 - 20 of 27
-
9/1/2003 - Conference papersResearchers have developed a miniature data acquisition system (MIDAS) that can measure resistance changes and temperature, store data for later retrieval, and illuminate LED lights. This instrument can be used with strain-gaged bolts, cable bolts, CSIR...
-
The Hazards In Motion video teaches mobile equipment safety for underground miners.
-
1/1/2001 - Technology NewsCDC/NIOSH Technology News brief on several technologies available to monitor the blind spots of large haulage equipment.
-
5/1/1997 - Reports of InvestigationsA report evaluating a wireless signaling and warning system for underground mines applicable to both coal and non-coal mines. A TeleMagnetic Signalling Systems wireless ultra-low-frequency electromagnetic signaling system was installed and tested.
-
7/1/1994 - Conference papersThe paper, presents the results of roof coal thickness measurements in underground mines and rib coal thickness measurements in highwall mines. The microwave sensor described uses a unique spatial modulation scheme created by antenna motion, along with ...
-
7/1/1985 - Peer reviewed journal articlesMedium frequency (MF) techniques have been successfully applied to the problem of radio voice communications in both coal and metal and nonmetal mines. MF techniques can also be applied to the areas of in-mine control and monitoring. Preliminary work in...
-
2/1/1984 - Peer reviewed journal articlesThe Bureau of Mines has conducted field studies in coal mines throughout the United States to determine the effectiveness of electromagnetic techniques in locating miners trapped underground following a mine accident.
-
9/1/1983 - Open File ReportsCurrent technologies for locating trapped miners from the surface are either simple direction finders or time difference pulse systems that have accuracy limitations. Developing technologies using full-vector field measurements at several receiving poin...
-
11/1/1981 - Contract reportsA prototype detector using electromagnetic signals for finding trapped miners has previously been built and tested. The signals are generated from transmitters carried on the miner's belt and powered by his head lamp battery and the receiver is a human ...
-
4/1/1981 - Contract reportsThis report presents test results, data evaluations, and typical system performance expectations based on wireless electromagnetic propagation measurements performed in the MAGMA Copper Company San Manuel mine near Tucson, Arizona during March 30 throug...
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program